Destroys VOC's from the Air, Kills Bacteria & Viruses,
and Removes ALL Particulates
Six Steps to Air
Purification - Read about the technology below
-
Step One:
Purifies the Air of Macro Particles - A treated (5) micron
pre-filter removes a particles from the air larger than (5) MICRONS,
extending the life of the HEPA filter and protecting the gas absorbing
media from dust coating and fouling.
Step Two:
Hospital Grade HEPA Filter Removes Allergens -
A hospital grade HEPA filter removes allergens so small that they can only
be seen with a microscope. Pollen, mold, fungal spores, dust mites,
cockroach dust, tobacco smoke and bacteria are but a few examples. Step Three:
Absorbs Toxic Chemicals and Gases -
A specially formulated gas absorption media absorbs automobile exhaust
fumes, organic hydrocarbons, formaldehyde from particle board used in home
construction, paint solvents, chlorine, cleaning chemicals and other fumes
until the Photo-Catalytic converter destroys the pollutants. Step Four:
“Photo-Catalytic Oxidation” Destroys Toxic Chemicals and Eliminates Odors
-
Activated carbon, zeolite and potassium permanganate can rapidly absorb
large quantities of toxic fumes however this media quickly becomes
saturated and slowly releases pollutants back into the air stream.
Photo-Catalytic Oxidation converts toxic compounds, even carbon monoxide
and nitrous oxide, into benign constituents such as carbon dioxide and
water without wearing out or losing its effectiveness, Step Five:
Ultraviolet Light Kills Disease Causing Germs on Contact -
Ultraviolet light 10,000 times the intensity of sunlight kills viruses and
bacteria too small to be filtered out by a HEPA filter, Ultraviolet
technology combined with Photo-Catalytic Oxidation is the most important
feature in air purification since germs are easily spread from one person
to another by central heating and air-conditioning system.. Step Six:
Negative Ions Improve Sleep and Keep Air Fresh (the ion generator is
totally optional and can be turned off for those sensitive to negative
ions and ozone) -
Oxygen in the air reacts with ultraviolet light to produce large amounts
of negative ions and activated oxygen.
The display / control panel gives the user total
control over the air quality
Has over 8
speed options including a low noise sleep setting
Displays a
reading of the indoor air quality
Can be
controlled by a remote control
has a motion
sensor that can turn the unit on and off if desired
Purifies
with Activated Carbon, Photo-Catalytic Oxidation (PCO), UV Light,
and a HEPA filter - ALL in the same system.
Filter
quality reading to lets you know when to replace the filter (the
filter last about 1 year and cost only $129.95 for the pre-filter,
carbon portion, HEPA filter, and the UV bulb!)
|
 |
Photo-Catalytic Oxidation (PCO) air purifiers draw air into the
photo catalytic chamber to be purified. The photo catalytic chamber consists
of a high intensity UV-C ultraviolet bulb (254nm) and a Titanium Dioxide
catalyst. When exposed to ultraviolet light, the
photocatalyst becomes highly reactive and attacks the chemical bonds of
the bio-aerosol pollutants, therefore converting the toxic compounds into
benign constituents, carbon dioxide (CO2)
and water (H2O).
|
 |
|
Utilizes:
Light Energy (UV-C)
Photocatalyst (TiO2)
|
|
|
Laboratory tests
have proven Photo-Catalytic Oxidation (PCO) to be highly effective for airborne biological
and chemical decontamination. This PCO process has been proven to
be 206% more powerful than chlorine and 157% more powerful than hydrogen
peroxide. The energy field in the photo-catalytic chamber is roughly
10,000 times more powerful than natural sunlight. |
|
Oxidation
Effects On Bacteria:
|
|
 |
 |
|
Approved and Used By:
-
United States Department of Defense
-
School Districts
-
United States Postal Service
-
Oklahoma State Building
-
San Francisco Fire Department
-
TGI Friday's
-
and many more...
|
|
